The single-phase induction motor is a popular workhorse motor with the advantages of being cheap, reliable, and able to connect directly to single-phase power, which makes them especially common in domestic and small commercial appliances. However, unlike three-phase motors, they are not self-starting, and require an additional winding driven by a capacitor to accelerate from standstill.
Rotating Magnetic Fields
For an induction motor to start running, a rotating magnetic field (RMF) must be produced in the stator, which induces rotation and torque in the rotor. Since the stator does not physically move, the rotation of the magnetic field is produced by the interaction between electromagnetic forces produced in the stator windings. In a three-phase motor, with each winding supplied by a voltage that is 120 degrees out of phase with the other windings, the sum of the forces produced is a vector that continuously rotates. This means that three-phase power is able to induce torque in the rotor at standstill, and three-phase motors can self-start without additional components.
A single-phase induction motor, however, is fed by a single-phase power supply that runs through a single stator winding. One stator winding on its own cannot produce an RMF – it merely produces a pulsing magnetic field that is made of two opposing fields spaced 180 degrees apart.
This creates two problems:
First, the motor is not self-starting, because the magnetic field produced by the stator is not rotating.
Secondly, although a single winding can drive the motor once it gets up to speed, it does not produce a consistent torque in the rotor during a full revolution, which leads to a loss of efficiency and performance. Maximum torque is experienced by the rotor at approximately 10% slip (the difference in rotation between the rotor and the stator winding) and therefore the rotor will spend a large part of each revolution experiencing very low torque.
To overcome these problems, single phase induction motors use a second stator winding, called an ‘auxiliary winding’ or ‘start winding’. This winding is rotated 90 degrees away from the main winding, and, by means of a capacitor that changes the phase of the supply voltage, it is fed by a voltage that is out of phase with the voltage supplied to the main winding. This means that the interaction between the two windings produces a rotating magnetic field, and the motor can self-start.
There are two capacitors, with different characteristics, that are used by single phase induction motors for different parts of their operation.
A start capacitor is one which is used to provide starting torque to the motor They are electrolytic capacitors with a capacitance value in between 50 uf all the way up to 1500 uf. They have relatively high losses and low efficiency and are not designed for continuous duty; it is necessary to disconnect them once the motor gets up to speed by using a centrifugal switch or relay of some kind.
A run capacitor is one which is used to smooth the torque of the motor during each revolution, increasing efficiency and performance. It is usually much smaller than a start capacitor, often less than 60 uf, and of the oil filled type to reduce energy losses.
Even with the additional auxiliary winding, a single-phase induction motor suffers from several limitations compared to a three-phase motor. The phase shift provided by a run capacitor changes with the speed of the motor, which means efficiency is not consistent as the motor changes speed. Efficiency is also affected by RMF being produced by two stator windings, and is not as close to a perfect circle as a three-phase RMF, meaning that torque still varies considerably during each revolution, reducing performance and increasing vibration. Also, the components required to make single phase induction motors self-starting, including the capacitors and centrifugal switch, provide an opportunity for thermal and mechanical wear to create maintenance problems.
For larger industrial applications requiring high efficiency, operating in areas where three phase power is available, a three-phase motor may be better suited.
Single phase induction motors are commonly found anywhere single-phase power is being used. When fitted with a start capacitor, they are able to develop sufficient starting torque to self-start, and a run capacitor improves their efficiency and performance during operation.
Credit: William Von Schrottky